All sensors and accessory components supplied with your CarPro-Tec are already programmed and fully configured. Please use the CarPro-Tec Quick Guide for initial setup of your new CarPro-Tec. For more advanced configuration options, this detailed manual will help you.
General Information
The PowerStation is specifically designed for the very low power consumption of the CarPro-Tec alarm system.
This ensures your CarPro-Tec remains safely powered even during extended standby periods.
Initial Setup
- Please fully charge the PowerStation before first use (see section "Charging" under "Daily Use").
- Place the PowerStation next to your CarPro-Tec and preferably secure it with the included 3M magnetic pad. Please refer to the installation guide for 3M adhesive pads.
- Finally, connect the PowerStation's charging cable (5V DC OUTPUT) to your CarPro-Tec.
Installation Example
Daily Use
Checking Battery Status
You can check the current battery level using the LED charge indicator by pressing it.
For accurate display of the charge level, the PowerStation must not be charging and no consumers like the CarPro-Tec should be connected, otherwise the display will be distorted.
Charging the PowerStation
- To charge, please remove the black rubber protection plug from the left charging port (5V DC INPUT).
- Insert the supplied charging cable into the port.
- Now fully charge the PowerStation.
A full charge may take approx. 10–16 hours depending on the charger used.
Safety Instructions
Important:
Never leave the battery charging unattended.
Always use a power adapter with 1A output (max. 1000mA charging current) to charge the PowerStation,
as overheating and damage or even fire hazards may otherwise occur.
Do not use the PowerStation in humid environments; it is intended for use in dry conditions only.
The PowerStation must never be exposed to fire; there is a serious risk of fire and explosion.
The PowerStation must only be used as intended for devices with a 5V USB connection.
Technical Data
- Protection features: short circuit, overcharge, discharge protection
- Cell type: cylindrical lithium-ion battery
- Battery capacity: 16.0 Ah
- Output voltage: 5 V
- Input: 5.0 V 1000 mA
- Output current: 1–1000 mA continuous
- Rated output: 5.0 V / 2000 mA (MAX)
- LED charge level indicator: available
- Charging time: approx. 10 hours
- Operating temperature: –20 °C to +50 °C
- Storage temperature: 0 °C to +45 °C
3M ADHESIVE PADS
WARRANTY NOTICE
BATTERY LAW INFORMATION
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article