CarPro-Tec Fusion App – Control & Settings

With the CarPro-Tec Fusion App, you can conveniently control and customize your alarm system. Below is an overview of the key features.

1. Arming/Disarming

With a single click, you can activate (arm) or deactivate (disarm) the alarm system to optimally protect your vehicle.

• Open the CarPro-Tec App.
• Tap the "Arm/Disarm" button to toggle the status.
• Visual and acoustic confirmations help you recognize the current state.

2. Acoustic Confirmations

Beep Sound

A signal tone sounds to confirm arming/disarming or when an alarm is activated/deactivated.

Siren Control When Switching

If the beep sound is not audible outside the motorhome, the external siren can be used as an additional acoustic confirmation.

3. Siren Control & Alarm Duration

You can individually set the siren alarm duration between 0:00 min and 3:00 min.

• Set 0:00 min if you are sleeping inside the motorhome.
• Use a longer duration to effectively deter burglars.

4. Interior Motion Sensor Settings

Sensitivity Adjustment via Dial

You can adjust the sensitivity of the interior motion sensor directly on the CarPro-Tec unit using a dial.

Sensitivity Adjustment via App

Alternatively, sensitivity can be conveniently adjusted via the Fusion App if conditions change.

5. Sensor Management

Accessory Sensors

• View a list of all connected sensors.
• Assign individual names and sensor types.
• In case of an alarm, the triggering sensor is displayed in the push notification and email alert.

Synchronize Sensor List

If sensors have been deleted or added, the list can be manually updated.

Delete All Sensors

• Deletes all connected sensors.
• Requires PIN code 1234 to prevent accidental deletion.

6. GPS & Route History

With the app, you can view the route history of your vehicle.

• Maximum view in the app: 2 weeks.
• Extended view for 4 weeks: Login at Amgotrack.

7. Notifications & Alarms

Alarm Push Notification

You can enable or disable push notifications for alarms.

Email Notifications

• Enable/disable email notifications for alarms or geo-fence breaches.
• Up to 2 email addresses can be stored.

8. Firmware Updates

The CarPro-Tec Fusion can be updated directly via the app.

• You receive a notification when an update is available.
• During installation, the green and blue LEDs flash alternately.

9. Geo-Fences (Virtual Security Zones)

Define areas to receive notifications when your vehicle enters or leaves a specific area.

• Push notification or email alert for boundary crossings.
• Multiple geo-fences can be individually configured.

Final Check Before Leaving Your Vehicle

Before leaving your vehicle, ensure that:

• ✔ The alarm system is set as desired (armed/disarmed).
• ✔ The sensors are correctly configured.
• ✔ Geo-fences are activated if in use.
• ✔ GPS tracking is active if required.

For further information, please refer to the CarPro-Tec User Manual.

Notice on App Functions

Full access to all app features is only available with a CarPro-Tec 4G LTE unit from the new sets (purchased on or after March 17, 2025).

If you purchased your CarPro-Tec before March 17, 2025, the following features are available in the app:

• GPS & Route History (6)

• Notifications & Alarms (7)

• Geo-Fences (9)

Upgrading or unlocking additional features is technically not possible.
If you have any questions or need advice, we’re happy to help.